1995 Bally Indianapolis 500 - Not Available

Check List When Buying A Pinball

Pinball

This is a very underrated game. It is well designed and VERY fast. The cabinet is a little faded but still looks great. The back glass has a slight scratch on the front right car. It was not noticeable with the regular lights but shows up with the LEDs. It is a great game and I am enjoying playing it and so will you!

So far, I have ordered $853 of parts. I am done and ordered $1,143 of parts.

Here are the items that I have determined are wrong with the game.

* Replace display board. Complete. ($220)

* Replace J120 connector. Complete. ($10)

* Added trough jam protector ($10). Complete.

* Replace Driver board. ($175) Complete.

* Replace three illumninated target boards. Complete. ($82)

* Fix the missing LED light on an illuminated target. Fixed. The wire in the connector needed to be pressed in further.

* The fins on two of the illuminated targets are broken. I jerry-rigged one (see pictures below). I will work on the other. All three completed. As of 10/20/2013, I found 2 replacement illuminated targets last night. I ordered them and hopefully I will get them in a few days and do a more permanent, correct solution.

* The Turbo is giving an error. I believe the opto needs to be checked and/or replaced. Complete. Replaced the transmitter board ($5) Once i got it back together it still disn't work. I replaced the 10 opto board ($85) since one of the blue resistors was very hot. I will try to fix the board later.

* EOS on Right Flipper is on test report. A wire needs to be resoldered. Resoldered.

* One of the bumper rod and rings needs to be replaced. This will occur when the game is taken apart to clean and replace LEDs ($250) and rubbers ($25). Replaced.

* Left lane at top switch not working. Adjusted.

* Replaced GI lights with LEDs in backbox and playfield.

* Replaced controlled lights with LEDs.

* Replaced Flashers with LEDs.

* Left sling plunger broken. Didn't have available. Just ordered 20 of them from Action Pinball and Amusement for $4.49 each (part #A-5103) While testing realized right sling was also broke and fixed it. ($15 total with postage)

* Clean Playfield.

* Install Cliffy protector at turbo hole, Installed. ($20)

* Install Cliffy protector at trough. ($10)

* Install plastic protectors. ($25)

* Install new plastics. ($176)

* Install new 10 opto board. (price above)

* Leg protectors ($25)

* Clean ramps.

* Replaced black sleeves with color coordinated sleeves. ($20)

Once I get the items above done and the parts come, I will clean and take apart and hopefully not find much else wrong.

The pictures have been taken with the glass off to get a better picture.

This game comes with a manual.

item Click on the Internet Pinball Database logo to the left. This is a GREAT resource to find out about the machine, see pictures, see reviews and download the rule sheet if one exists for the game. This provides additional insights into playing the game.

 

item

New display. There is a slight scratch on the right car. Look at the top left tip of the "5" and move to the left to the 3rd white area and you will see it right below the strut almost against the blue on the right.

 

item

 

 

item

All Illuminated targets work nicely.

 

item

I color coded the sleeves.

 

item

 

 

item

Paper inserts.

 

item

Right cabinet faded but in nice condition.

 

item

Right back box is pretty nice with some minor scratches at the bottom.

 

item

Left cabinet is faded but nice.

 

item

Left back box is nice with some scratches at the bottom.

 

item

The front is nice.

 

item

This is what it looked like when I first got in and replaced the display.

 

item

Note the credit dot. Display is brand new.

 

item

It doesn't look bad. It will just look and be better when I am done.

 

item

A little dirty but will clean up nicely.

 

item

 

 

item

 

 

item

 

 

item

 

 

item

Optional Description

 

item

 

 

item

 

 

item

 

 

item

 

 

item

 

 

item

 

 

item

 

 

item

 

 

item

 

 

item

 

 

item

 

 

item

The race track is off. About to take off the ramps and clean.

 

item

Left ramp about to be removed.

 

item

Left ramp removed.

 

item

Turbo removed.

 

item

Dirty ramp.

 

item

Back box regular lights.

 

item

Back box LEDs.

 

item

Race car divertor/lock.

 

item

This wire form keeps the ramp in place with a tyvek tie.

 

item

This is the divertor plunger. It is removed with a 3/32 allen wrench.

 

item

The race car removed.

 

item

The ramp removed.

 

item

The plastic ramps removed. Will now remove the right wire ramp.

 

item

All ramps removed.

 

item

Cleaned.

 

item

Cleaned.

 

item

Now that the ramps are off, the bumper rod and ring was removed since it was broken. Notice the right rod is missing the screw area at the bottom.

 

item

About to install the Cliffy protector.

 

item

 

 

item

Cliffy protector installed.

 

item

Cleaning under ramp before.

 

item

Cleaned.

 

item

Dirty.

 

item

Cleaned.

 

item

Cleaned.

 

item

Was about to add the protectors but relized the plastics should be replaced so ordered plastics.

 

item

Note that this plastic is missing the whole lower portion.

 

item

 

 

item

 

 

item

The cracked plastic (and all plastics) have been replaced.

 

item

The connector to the sling is broken. I used a tyvek tie to connect and align.

 

item

The right wire ramp reinstalled.

 

item

The lower ramp installed.

 

item

 

 

item

 

 

item

 

 

item

The race car divertor reinstalled.

 

item

The turbo reinstalled. I already replaced the opto transmitter. This still registered an error. I felt the blue resistors on the 10 opto board and one was very hot. I replaced the board and this worked fine.

 

item

 

 

item

The left ramp and wire form installed.

 

item

 

 

item

The right exit is attached to the wire form with a tyvek tie.

 

item

Pretty.

 

item

Race track installed.

 

item

 

Virginia Sales Tax

Virginia sales tax is currently 6.0%. Sales tax for in-state orders applies to machines and parts. It does not apply to the delivery or repair services.

Warranty

As of August 1, 2014, we will no longer provide a warranty with our pinballs unless you purchase a separate warranty from us. A 1 year warranty is $500 or pay as you go if you even need it. If you buy it directly from us and take it home yourself, you will be inspecting it to ensure it works. If we deliver, we will ensure that it works 100% when delivered.

Reasons You Should Let Us Deliver Your Pinball (or Another Machine)

  1. We will NOT provide a warranty for the machine since we cannot be assured that a problem did not happen when you transported the machine. (As of August 1, 2014, we will no longer provide a warranty with our pinballs unless you purchase a separate warranty from us. A 1 year warranty is $500 or pay as you go if you even need it. If you buy it directly from us and take it home yourself, you will be inspecting it to ensure it works. If we deliver, we will ensure that it works 100% when delivered.)
  2. We take responsibility for any damage that may occur during the delivery process.
  3. We professionally set up the machine, connect all the connectors, attach the legs, head, etc. and ensure that the pinball works properly. If anything is out of adjustment due to moving the machine, we can fix it in a few minutes as compared to having to come to your house later and charging you a trip fee and repair charge.
  4. If anything major is out of adjustment, we can order parts and repair. This hardly ever happens but it could and you and the machine are protected.

Delivery Options

We are currently set up for local delivery only within the Northern Virginia, Washington DC, Maryland, and North-Eastern West Virginia area. If you are interested in shipping the pinball machine, we will contact a shipper. You will pay all crating and postage costs.

If you would like us to deliver and set up within 50 miles of Purcellville, the charge is $300; within 100 miles $475. The delivery charge includes delivery to a first floor or basement level if walk-out.

We will not sell you a game/deliver the game if the only entrance to your basement is an inside the house staircase. They are too narrow. Plus we have to ensure we don't mess up carpet or wood. It just isn't worth it.

You may also come and pick up the machine from our location.