1991 Williams Hurricane - Not Available

Check List When Buying A Pinball

Pinball

Initial Issues:

* One GI strand on the backbox. J120 connector needs to be rebuilt. - Complete 9/10 fixed J120, J121 and J115.

* Ferris Wheel motor needs to be replaced. - new motor received 9/6/2015; replaced. J104 was incorrectly attached to J129. Relay board may be bad; order new one on 8/13/2015. Actual issue was wire from J116-2 was cut. I added a new wire.

* Flipper assembly, coils and bats need to be replaced. - Complete 9/7/2015

* I will add LEDs. - Started 9/7/2015; added all back box LEDs 9/10/2015. Complete 9/13/2015. Actually I need to add white flashers to the header but do not have any more and don't want to take them from another game.

* I will take apart the game and clean, replace rubbers, posts, bumper assemblies. Complete 9/13/2015

* Fuse blows but tracked down to left EOS switch not adjusted. This will be fixed with new EOS Switch. - fixed 9/7/2015 with new flipper assemblies.

* I will add the Kahr Power Daughterboard. - Arrived 9/14/2015; will install when I work on the relay board.

The pictures have been taken with the glass off to get a better picture.

This game comes with a manual.

item Click on the Internet Pinball Database logo to the left. This is a GREAT resource to find out about the machine, see pictures, see reviews and download the rule sheet if one exists for the game. This provides additional insights into playing the game.

 

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

 

item

The back box and topper look great. The disc spins. In this picture, the header flashers have not yet been changed to LEDs.

 

item

 

 

item

Note that the bumpers are GI lit. They saved a few cents by not lighting them at all.

 

item

 

 

item

 

 

item

 

 

item

The plastic ramps all cleaned up well.

 

item

Cabinet faded. Note the wear near the flipper button.

 

item

Back box nice. Topper not shown because I got lazy in cropping.

 

item

 

 

item

Faded cabinet and more wear on left side flipper button.

 

item

 

 

item

As originally purchased.

 

item

The DMD display is nice and the wheel spins.

 

item

Not bad.

 

item

 

 

item

 

 

item

 

 

item

Cabinet faded.

 

item

 

 

item

 

 

item

 

 

item

 

 

item

Replace both flippers, bats, coils, assemblies.

 

item

 

 

item

 

 

item

 

 

item

 

 

item

 

 

item

 

 

item

The orange GI Strand was out.

 

item

Because this connector was not put together correctly.

 

item

They tried to fix it by adding a groun wire to the brown colored wire. Instead of doing the job right, the prior repair person did a half-a$$ job.

 

item

LEDs added.

 

item

Disc removed to replace LEDs below. I will also replace the 4 flashers.

 

item

All 10 flashers replaced as well as all LED 555s.

 

item

Disc reinstalled.

 

item

Here is the original picture from above for comparison.

 

item

The next few photos show the backbox with the back box motor spinning the disc.

 

item

 

 

item

 

 

item

 

 

item

 

 

item

 

 

item

 

 

item

Dirty before I take apart to clean.

 

item

 

 

item

 

 

item

Bottom plastic ramp removed as well as left in lane wire ramp.

 

item

 

 

item

Cross ramp removed.

 

item

Center ramp removed as well as back ramp.

 

item

Dirty.

 

item

 

 

item

 

 

item

Cleaned and LEDs added.

 

item

 

 

item

Bumper caps have no lights.

 

item

 

 

item

Added lights to GI.

 

item

 

 

item

 

 

item

 

 

item

Removing plastics around Ferris wheel to remove 7 screws.

 

item

7 screws - 3 rows of 2 and 1 on bottom.

 

item

 

 

item

 

 

item

The Ferris wheel is powered by 2 12 Volt white blue wires that should have been plugged into P1 and Pin 2 of J104. If you follow the blue wire at the left, it was plugged into J129. I moved it to J104. The voltages are showing at about 13.48 Volts AC. I tested the motor. So I ordered a new relay board and hope this will allow the ferris wheel to spin.

 

item

 

 

item

 

 

item

 

 

item

 

 

item

Cleaning ramps.

 

item

 

 

item

Back ramp installed.

 

item

 

 

item

 

 

item

 

 

item

 

 

item

 

Virginia Sales Tax

Virginia sales tax is currently 6.0%. Sales tax for in-state orders applies to machines and parts. It does not apply to the delivery or repair services.

Warranty

As of August 1, 2014, we will no longer provide a warranty with our pinballs unless you purchase a separate warranty from us. A 1 year warranty is $500 or pay as you go if you even need it. If you buy it directly from us and take it home yourself, you will be inspecting it to ensure it works. If we deliver, we will ensure that it works 100% when delivered.

Reasons You Should Let Us Deliver Your Pinball (or Another Machine)

  1. We will NOT provide a warranty for the machine since we cannot be assured that a problem did not happen when you transported the machine. (As of August 1, 2014, we will no longer provide a warranty with our pinballs unless you purchase a separate warranty from us. A 1 year warranty is $500 or pay as you go if you even need it. If you buy it directly from us and take it home yourself, you will be inspecting it to ensure it works. If we deliver, we will ensure that it works 100% when delivered.)
  2. We take responsibility for any damage that may occur during the delivery process.
  3. We professionally set up the machine, connect all the connectors, attach the legs, head, etc. and ensure that the pinball works properly. If anything is out of adjustment due to moving the machine, we can fix it in a few minutes as compared to having to come to your house later and charging you a trip fee and repair charge.
  4. If anything major is out of adjustment, we can order parts and repair. This hardly ever happens but it could and you and the machine are protected.

Delivery Options

We are currently set up for local delivery only within the Northern Virginia, Washington DC, Maryland, and North-Eastern West Virginia area. If you are interested in shipping the pinball machine, we will contact a shipper. You will pay all crating and postage costs.

If you would like us to deliver and set up within 50 miles of Purcellville, the charge is $300; within 100 miles $475. The delivery charge includes delivery to a first floor or basement level if walk-out.

We will not sell you a game/deliver the game if the only entrance to your basement is an inside the house staircase. They are too narrow. Plus we have to ensure we don't mess up carpet or wood. It just isn't worth it.

You may also come and pick up the machine from our location.